basic Valorant Settings
basic's eDPI is 224. Enter your mouse DPI to get the sensitivity that matches exactly.
Technical Aim Analysis & Sensitivity Math for basic
basic is a professional Valorant player currently competing for FURIA. To maintain peak mechanical aim and crosshair stability in VCT competitions, basic uses a Logitech G Pro X2 SUPERSTRIKE Lunar Eclipseconfigured with a DPI setting of 100 and an in-game sensitivity of 0.28. This yields an Effective DPI (eDPI) of 224.
Physical Mouse Distance (360° Turn): At an eDPI of 224, executing a complete 360-degree in-game rotation requires approximately 137.1 cm (or 54.0 inches) of physical mousepad movement. This places basic's sensitivity in the Low eDPI (Arm Aiming) category, which optimizes micro-adjustments for long-range engagements while retaining enough speed to check corners.
Beyond sensitivity math, basic pairs their mouse with a 2000Hz display refresh rate and a resolution of 1920x1080 to minimize input latency. Below is the full breakdown of gear, including monitor refresh rate, keyboard switches, and official crosshair import code used by basic.
Crosshair Settings
0;s;1;P;h;0;f;0;s;0;0l;3;0o;0;0a;1;0f;0;1b;0;S;c;4;s;1.239;o;1In VALORANT: Settings → Crosshair → Import Profile Code
Preview with different backgrounds →Gear & Setup
Full Mouse Settings
basic gear breakdown: what each piece actually changes
Mouse: Logitech G Pro X2 SUPERSTRIKE Lunar Eclipse at 2000Hz polling. At 1000Hz the mouse reports every 1ms, which is the competitive baseline — stable on any modern CPU with Raw Input Buffer enabled. DPI 100 with sens 0.28 means the in-game multiplier does the fine work while the sensor stays in its clean tracking range.
Display: ZOWIE XL2566K at 1920x1080. Lower resolutions like 1280x960 stretch targets wider and can make heads feel easier to hit, at the cost of peripheral clarity; native 1920x1080 keeps UI and minimap sharpest. Pair this with multithreaded rendering on, V-Sync off, and NVIDIA Reflex on+boost if available — frame latency matters more than texture detail for holding angles.
Supporting gear: Wooting 60HE v2 Black for movement keys, ZOWIE G-SR-SE BLUE II under the mouse, and HyperX Cloud III for footsteps, none of which change eDPI, but all of which change consistency: a familiar pad glide and audible footsteps cut down unforced errors more than any sens tweak. If you copy one thing, copy the eDPI (224), not the brand names.
basic crosshair explained: Green no center dot, inner lines (length 3, offset 0), outer lines off, outlines off
Import code: 0;s;1;P;h;0;f;0;s;0;0l;3;0o;0;0a;1;0f;0;1b;0;S;c;4;s;1.239;o;1. In plain terms this is a Green no center dot, inner lines (length 3, offset 0), outer lines off, outlines off setup. Small inner-line crosshairs like this reward centered head-height placement — you see more of the target around the lines, which helps one-taps at range. The tradeoff is visibility on bright maps (Icebox snow, Breeze sand): if you lose the lines, switch the color to cyan or green rather than enlarging the gap, which would cost precision.
To try it: copy the code above, then in Valorant go to Settings → Crosshair → Import Profile Code, paste, and test in the Range against strafing bots before taking it into ranked. Full per-background preview lives on the crosshair preview page.
basic vs other pros: same game, different mousepad math
basic at 224 eDPI is 56 points below the pro average (280). As a mid-range hybrid aimer, basic needs roughly 13.7 cm per 360° turn — plan mousepad space around that number, not around anyone else's brand of mouse.
| Player | Team | DPI | Sens | eDPI |
|---|---|---|---|---|
| basic (you are here) | FURIA | 100 | 0.28 | 224 |
| TenZ | T1 | 1600 | 0.195 | 312 |
| aspas | MIBR | 100 | 0.4 | 320 |
| ZmjjKK | Edward Gaming | 800 | 0.395 | 316 |
Reading the table: lower eDPI favors calm angle-holding and spray control; higher eDPI favors entry swings and fast clears. None is "best" — pick the row whose turn-distance fits your desk, then use the converter at the top to match it on your own DPI.
How to copy basic's settings without ruining your aim
- Match eDPI first. Enter your DPI in the converter above and set the sens it gives you — that reproduces basic's turn-distance exactly.
- Keep your old crosshair for one session if basic's lines feel alien; change sens and crosshair on different days so you know which change helped.
- Set scoped sens to 1 only if you play the same scoped weapons; otherwise leave yours — scoped multipliers are personal.
- Give it 3–5 ranked games, then adjust in 5–10% steps. One bad deathmatch is not data.
Data on this page is compiled from public pro-settings listings and community-verified corrections (see Suggest an edit above — 3 matching votes auto-updates a field). Last reviewed against our settings snapshot; if a value changed on stream, submit the correction and it ships after review. Source listing on ProSettings.net ↗
basic settings FAQ
What sensitivity does basic use?
basic plays on 100 DPI with 0.28 sens — eDPI 224, scoped 1.
What is basic's crosshair code?
0;s;1;P;h;0;f;0;s;0;0l;3;0o;0;0a;1;0f;0;1b;0;S;c;4;s;1.239;o;1 (Green no center dot, inner lines (length 3, offset 0), outer lines off, outlines off).
What mouse does basic use?
Logitech G Pro X2 SUPERSTRIKE Lunar Eclipse Polling rate 2000Hz.
Should I copy basic's eDPI of 224?
Only if the turn-distance fits your space: about 13.7 cm per 360°. Match eDPI with the converter, test 3–5 games, then tune ±10%.
